When there is a risk of explosion in production vessels, oxygen sensor accuracy and speed of response are paramount. For a leading producer of performance additives, an in situ O₂ analyzer is providing high performance with almost zero maintenance.
Phosphorus pentasulfide is an inorganic compound used in the production of lubricants, pesticides and flotation agents. It is extremely flammable, which is why an inert atmosphere must be maintained during its production.
A closed extractive measurement system and paramagnetic analyzer can be used to monitor O2 levels inside production line equipment. Keeping moisture in the gas sample at a very low level avoids negative effects on analyzer response time and performance.
Italian company needs fast, accurate O2 measurement
Italyʼs Italmatch is a leading supplier of performance additives for the lubricant, plastics, water and oil industries. They required an improved oxygen analyzer and sampling system to reduce measurement time and increase accuracy for phosphorus pentasulfide production in their Spoleto plant.
Advanced technology provides measurement confidence
Tunable diode laser (TDL) gas analyzers use laser light, tuned to a specific frequency, to rapidly detect the quantity of a target element in a gas stream. METTLER TOLEDOʼs growing GPro® 500 series of analyzers offers TDLs with a wide range of process adaptions. This gives the series exceptional flexibility in respect to application suitability and installation possibilities.
Other than annual verification and periodic cleaning of the analyzerʼs optics, GPro 500 sensors require no maintenance, so they can be relied on to provide continuous, reliable measurements throughout production processes. The GPro 500 is installed in situ when process conditions allow, or is connected to an extraction system if the gas stream has a very high particle load and moisture content, as is the case at Italmatch.
Six months without maintenance
A demonstration of the GPro 500 at Italmatchʼs Spoleto facility convinced the instrumentation team that the analyzerʼs ease of use, speed of response, and low maintenance would meet all their needs. In addition, they appreciated the two alarm thresholds on the connected M400 transmitter that would signal when a lower and higher O2 level in the production equipment had been breached; something that was not possible with their paramagnetic analyzer.
A GPro 500 with an extractive cell adaption was duly installed to a new extraction system. Since its commissioning, the Spoleto plant has been very impressed with the GPro 500ʼs measurement accuracy, rapid measurement and problem-free operation. The site manager said, “Iʼm delighted with the analyzer. It was surprisingly easy to install and since turning it on six months ago weʼve had no downtime from it whatsoever. I wish weʼd known about it years ago.” At Italmatch, confidence in the accuracy of production vessel O2 levels has been well and truly restored.
Contact Westech Industrial for more information on our Mettler Toledo product line or to find out more about getting a custom built sampling system please contact Westech Industrial at (403) 252-8803 or visit our website at https://bit.ly/370fb2S.
Share This: