CDN NEWS | 
US NEWS 
When a composite sampler is used for sampling, extracting a consistent representative sample of the flowing stream is of the utmost importance. Our A+ products can help. The GP2™ Genie® Membrane Probe™ offers the A+ Corporation’s field-proven, phase separation Genie® Membrane Technology™ to reject entrained liquids at the flowing line temperature and pressure, while its minimal internal volume helps to maintain sample integrity as it’s transported to the composite sampler. Incorporating CSA (Composite Sampler Adapter) to the top of the Model GP2™ allows for easy installation of multiple manufacturers’ composite sampling units directly onto the probe.
Product Information
The safest and most versatile probes available on the market!
Liquid carry over from the pipeline into the sample conditioning system should be prevented when sampling natural gas as it can directly impact the accuracy of the compositional analysis and also damage the analyzer. Industry standards state that equipment used to remove liquid from the sample must be operated at flowing temperature and pressure conditions. Genie® Probes™ provide a means to insert Genie® Membrane Technology™ directly into a pipeline for the purpose of separating unwanted liquid and particulate from the gas sample at flowing temperature and pressure conditions, in compliance with industry standards.
The GP2™ probe consists of a housing and a membrane tip probe. The housing is installed in a depressurized pipeline through a vertically mounted thread-o-let or flange, and contains a “foot valve” in its lower end. Inserting the probe into the housing opens the “foot valve”, allowing pipeline gas to flow freely through the membrane. Retracting the probe from the housing closes the foot valve, making it possible to perform probe maintenance without depressurizing the pipeline. This insertion/retraction method is considerably less expensive and complex than pneumatic or hydraulic methods.
An optional hex adapter is available to prevent liquids from being forced through the membrane and should be selected when the probe is being used in spot and composite sampling applications.
For more information on our A+ Corporation Genie sampling probes and filters visit our website at https://bit.ly/3fswh0w or call us at 1-800-912-9262. You can also visit us and our A+ Corporation representative at the Western Gas Measurement Short Course in Victoria BC on July 12-15th at booth 63.
Share This:
