Pump Off Controllers, Variable Frequency Drives, and Burner Management Systems
WatchDog3 MODBUS Communication
WatchDog3 now has the capability to interface with existing devices that communicate via MODBUS: Some examples are Pump Off Controls, Variable Frequency Drives, Burner Management Systems and Electronic Submersible Pumps.
Remote access to data from these devices allows you to optimize your existing assets at an affordable cost.
Once connected to the device you can view your data and control your oil well through any laptop or cell phone.
Interfacing with a Lufkin SAM Controller
Vital Information + Pump/Surface Card & Control
With a touch of your finger you can access all the vital POC information, view surface/pump cards, and control your well.
POC Status Registers
Register | Value |
Well State | Pumping Normal State – (7) |
Stroke Period | 9 |
Current Load | 10389 |
Current Torque | 18240 |
Strokes Per Minute | 6 |
Yest. Avg. SPM | 6 |
Today Avg. SPM | 6 |
Today Total Strokes | 1561 |
Yesterday Percent Run | 20 |
Current Percent Run | 20 |
Pump Card Max Load | 65456 |
Pump Card Min Load | 60578 |
Net Stroke | 14613 |
Pump Fillage | 91 |
Fluid Load | 3618 |
Surface Card Max Load | 17402 |
Surface Card Min Load | 8255 |
Control
WatchDog can start, stop or change the speed of the well through the POC via your smart phone or a laptop. This allows companies to produce more oil with less equipment failures.
Pump/Surface Card:
Access to pump and surface card information provide further optimization opportunities.
For a fraction of the cost of a traditional SCADA system, WatchDog3 can now bring back data from a wide variety of devices throughout your field.
Contact AFTI Watchdog
Contact: Caleb Pierce
Phone:403.919.3021
Email: info@afti.ca
Website: www.afti.ca
Other Info: Please visit our demo site at http://demo.afti.ca to take a Virtual Well Site visit for yourself.
Share This: