Polvo Powdered Emulsifier is YOUR Solution
With the current trend of drilling with Oil Based Mud, there is always a demand for innovative products that can withstand harsh Canadian winters and deliver on performance in the field. Di-Corp has partnered with Gumpro to meet these challenges. With extensive laboratory research and development to create a low pour point product, Gumpro has developed a series of powdered additives for Oil Based Mud systems, the Polvo Series.
The Polvo Series is a free flowing powder that not only eliminates any pour point issues that occur, but they also reduce drum handling, cleaning and disposal costs. Polvo products have also been shown to improve your mud’s stability, meaning it can be stored and transferred without any concern for separation and re-mixing at the rig site.
OPERATIONAL EFFICIENCY
- NO POUR POINT ISSUES – Free Flowing, readily dispersible powders add a performance advantage of treating system immediately with only one bag at a time and no need to pre-heat drums
- NO SOLVENTS – Used for different base oil muds with reduced toxicity
- PRO ENVIROMENT – Less overall environmental foot print with no requirement for washing or waste disposal and no drums on site
- LOWER LOGISTICAL COSTS – No handling, hauling cleaning or recycling of drums, saves space at rig site and cost of transporting of product
Send back PALLETS from the rig; NOT EMPTY DRUMS
TECHNICAL BENEFITS
- IMPROVED EMULSION STABILITY – Higher concentration of emulsifier results in no separation after >7 days. No pre-mixing is necessary.
- IMPROVED RHEOLOGY – Free Flowing, readily dispersible powders can be added at the hopper and sheared right into the mud, thus enhancing system rheology prior to being pumped down-hole
- TIME MANAGEMENT – No need to pre-warm drums in the mix shack means quicker mixing times on-site
- ON-SITE SAFETY – Bags are safer to handle as most rigs are not equipped with a drum lift
- PRODUCT COMPATIBILITY
- Compatible with all types of non-aqueous drilling fluid systems
- Suitable over wide range of Mud weights and Oil-Water Ratios
- Effective over wide range of Bottom Hole Temperatures
- DOSAGE COSTS
- Reduces Dosage of Organophilic Clays
- May Require Reduced Dosage overall
If you are a Drilling Fluids company, please contact Di-Corp for more information!
Share This: